mechanical abrasion
英 [məˈkænɪkl əˈbreɪʒn]
美 [məˈkænɪkl əˈbreɪʒn]
网络 机械磨损
双语例句
- Study on the Machining Performance of Single Crystal Silicon Wafer Cut by Using Reciprocating Electroplated Diamond Wire Saw Characteristic of Material Removal in Chemical Mechanical Polishing of Silicon Wafer Based on Abrasion Behavior
往复式电镀金刚石线锯切割单晶硅片特性研究基于磨损行为的单晶硅片化学机械抛光材料的去除特性 - The results show that the mechanical properties of RPC possess high strength, toughness, and abrasion resistance.
研究结果显示，活性粉混凝土具有高强度、高韧性及抗磨损等力学特性。 - The utility model has obvious energy saving effect and can not increase mechanical abrasion degree, and can be widely used for the motor vehicles such as a diesel oil vehicle, a gasoline vehicle, etc.
本实用新型节能效果明显，不会增大机械的磨损程度，易推广，可广泛用于柴油、汽油车等机动车上。 - Characteristic of Material Removal in Chemical Mechanical Polishing of Silicon Wafer Based on Abrasion Behavior
基于磨损行为的单晶硅片化学机械抛光材料的去除特性 - High mechanical strength, resistance to press, impact resistance to abrasion.
机械强度高、耐重压、耐冲击、耐磨耗。 - Modification and application of polytetrafluoroethylene ( PTFE) are studied. Mechanical properties and abrasion resistance of PTFE filled with glass fiber, molybdenum disulfide ( MoS 2) and mixture of glass fiber and MoS 2 are probed.
研究聚四氟乙烯的改性及应用，探讨了玻纤、二硫化钼以及玻纤和二硫化钼复合填充改性聚四氟乙烯的力学性能和耐磨性能。 - It shows that; failure mode is mainly of rolling contact fatigue breakage with mechanical abrasion and the plastic distortion appeared in the roller surface by the higher touch stress.
结果表明：冷轧状态下，轧辊的失效形式主要是滚动接触疲劳破坏兼有一些机械磨损以及在较高的接触应力下轧辊表层产生的塑性变形。 - Effects of RE content on mechanical properties and abrasion resistance of high carbonic chromium cast steel were studied.
研究了稀土元素及其添加量对高碳铬铸钢力学性能和耐磨性的影响。 - Practicability Study of Increase of Service Life of Mechanical Components Resisting Scoring Abrasion by using Ceramic Metal Composite Technique
利用陶瓷&金属复合技术提高部件抗冲刷磨蚀寿命 - This kind of gear steel has refined grain size with high mechanical strength and good service performance such as high rigidity, high abrasion resistance, good hardenability and tenacity.
该系列钢种具有细晶粒组织，并具有高硬度、高耐磨性、淬透性好、韧性适中等特点。 - The patented valve has advantages of both motion valve and fixed valve, such as less maintenance, less unplanned shutdown due to mechanical failure of valve and less valve abrasion.
专利阀兼有运动阀和固定阀的优点，维修工作量小，阀因机械故障而引起的计划外停产减少，还减少阀的磨损。 - The hot press roll forging die which is subjected to strongly bended and extruded stress as well as to be repeatedly heated and cooled quickly always presents many types of fatigue forms of mechanical fatigue rupture, brittle rupture, abrasion and collapse.
辊锻模具在工作时不仅受到高的弯曲及挤压应力的作用，而且还受到重复剧烈的急热急冷的作用，往往呈现有机械疲劳断裂和脆性断裂、磨损、塌陷等多种失效形式。 - The results show that the mechanical and chemical properties ( such as hardness, abrasion resistance and corrosion resistarce) were extremely improved The hardness of diamond?
测量结果表明，沉积膜的硬度、抗磨损和抗腐蚀特性均有了明显提高。 - The mechanical polishing action of nanoparticles in lubricating oil was very unconspicuous in short order to the common couple-material, but long-range action effect lay on the competition between mechanical polishing action and mechanical wear abrasion action.
对普通摩擦副而言，纳米粒子在短时间内的机械抛光作用并不会太明显，而长期抛光作用则取决于摩擦过程中纳米粒子机械抛光作用和机械摩擦磨损作用两者之间的竞争。 - The relationships between the chemical composition, Quenching and tempering temperature, microstructure, phase structure, mechanical property and abrasion resistance in medium chromium steel have been studied.
本文研究了中铬钢的化学成、分淬火温度、回火温度、显微组织、相结构与力学性能和耐磨性的关系。 - The effects of fiber twist and dipping treatment on the mechanical properties and resistance to abrasion and wear of ultrahigh molecular weight polyethylene ( UHMWPE) fiber were studied.
研究了纤维的捻度及浸胶处理对超高相对分子质量聚乙烯（UHMWPE）纤维力学性能及摩擦磨损性能的影响。 - Several special application of corporation is realized ( for example, the testing and analysis module of the mechanical abrasion, the module of the Remote-Task information manager and the module of the feedback manager of support water etc.)
研究实现了特殊的一些企业应用（如：机械磨损检测分析模块，远程任务单模块和给排水投诉模块等）。 - The study results have showed that the mechanical strength, film forming properties, abrasion resistance and water-resistance of the latex are directly affected by the type and ratio of different monomers.
研究表明：不同单体种类、配比及用量直接影响到乳胶的机械强度、成膜性、耐水性及耐磨性。 - The autoclave and its auxiliary equipment in industrial test research could meet the requirements of rigor leaching environment, such as high temperature, pressure, sulphuric acid medium, pure oxygen atmosphere, mechanical stirring and abrasion by concentrate, and the autocontrol level is high.
工业试验研究的加压釜及其附属设备可以满足高温、加压、硫酸介质、纯氧气氛、机械搅拌、精矿磨损的苛刻浸出环境要求，并实现较高的自动控制水平。 - Mechanical strength, machinability, surface corrosive and wear abrasion of a new type glass ceramic composed of fluorophlgopite Ca-mice were studied in this article.
研究了一种新型的钙云母为主相高强度的可切削玻璃陶瓷的力学性能、可加工性、表面耐腐蚀性、耐磨耗性。 - By combining the test with the theoretical analysis in terms of thermodynamics, chemical reaction and mechanical abrasion, the wear mechanisms of the diamond cutting tool in ultra-precision turning aluminum, copper and silicon were comparatively analyzed in detail.
结合热力学、化学反应磨损和机械磨损的分析方法，对金刚石车刀在切削3种材料时的不同磨损机理进行了实验研究和理论分析。 - It is identified that the said early failure of the tubing resulted from the groove-like mechanical damage caused by the longitudinal abrasion by the sucker rod against the tubing inside surface and the joint corrosion by H 2 S, CO 2 and Cl.
指出了抽油杆沿管内壁纵向摩擦形成沟槽状机械损伤，以及H2S、CO2和Cl-共同腐蚀是造成油管早期失效的主要原因。 - The mechanical properties, abrasion performance and mechanism of the RE/ MoSi_2 composites were investigated by means of friction and abrasion tester, vickers indentation, X-ray diffraction ( XRD), scanning electron microscope ( SEM) and microprobe this paper.
采用磨损试验机、压痕法、X射线衍射仪（XRD）、扫描电子显微镜（SEM）及微探针等研究了稀土/MoSi2复合材料的力学性能、磨损性能及机理。 - It is reported that starch partly instead of carbon black ( CB) can improve the wet sliding properties of tires, but can reduce the mechanical and the abrasion properties.
据文献报道，淀粉部分取代炭黑用做轮胎胎面，可改善材料的抗湿滑性能，但对耐磨性能和力学性能产生不利影响。 - Because of hydrophilic extender and lower degree of crosslinking, properties of water resistence, mechanical behavior and abrasion resistance of film of the one-component waterborne polyurethane is poor.
但因单组份水性聚氨酯结构中交联程度较低，且引入了亲水扩链剂，使其涂膜的耐水性、机械性能、耐磨耗等性能较差。 - Polyester ( PET) not only has excellent mechanical properties but also has good abrasion resistance, corrosion resistance, smooth surface. It was widely used fabric, clothing and technical textiles.
涤纶（PET）不仅具有优良的力学性能，并且耐磨性好、耐腐蚀、表面光滑，广泛用于面料、服装以及产业用方面。 - The main reason of damage to refractory materials, including chemical erosion, mechanical abrasion and thermal stress.
耐火材料的损毁主要原因包括化学侵蚀、机械磨损和热应力。